T3000 V3 - ECCENTRAL POLISHING MACHINE SET

T3000 V3 - Eccentric polishing machine set

Technical data

• Power consumption: 900 watts
• 10mm orbit mechanics
• Low vibration
• Perfect constant electronics
• Operating voltage: 240VAC, 50-60Hz
• Lifting speed: 2,500 - 6,500 min-1
• Cable length: 6 m
• Polishing stroke: 10 mm
• Thread connection: 5/16"-24
• Diameter of polishing plate: 125 mm
• Certified according to: CE
• WEEE reg. no. DE 64199561

Consisting of:

• 1x Liquid Elements T3000 V3 eccentric polishing machine

• 1x Liquid Elements Centriforce Standard - polishing sponge orange (medium) 125mm

• 1x Liquid Elements Centriforce sanding - polishing sponge Burgundy (coarse) 125mm

• 1x Liquid Elements Centriforce high gloss polishing sponge yellow (fine) 125mm

• 1x Liquid Elements Masking Tape 19mm

Liquid Elements T3000 V3 eccentric polishing machine

The T3000 V3 eccentric polishing machine is suitable for everyone with a 10mm eccentric HUB, the standard 125mm backing plate and an output of 750 watts. Due to the constant keeping with remote electronics, the freely rotating rotation of the support plate does not stop, even in the event of slight tilting on round surfaces.

Whether you are completely new to vehicle preparation or a professional detailer, this machine is something for every user.

The T3000 particularly stands out with the modern design of the eccentric polishing machine, particularly pleasant feel, and robust and smooth-running electronics. The two LEDs light up on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb lights up, the pressure on the surface is sufficient. If the red LED bulb lights up, the pressure on the surface must be reduced.

Liquid Elements Centriforce polishing sponges

The Liquid Elements "Centriforce" polishing sponges, also known as polishing pads, are a revolution in car care.
The best possible German-made foam was used for these polishing sponges.
The foam specially developed for vehicle care offers the best quality and promises a long service life.
The specially developed hole in the middle of the polishing sponges ensures better cooling and generates centrifugal forces,
which center the effect of the polish and make better use of it.

The Liquid Elements "Centriforce" series has a suitable pad developed for every purpose and the general processing
is unparalleled in the industry.
The Liquid Elements "Centriforce" polishing sponge series offers an unbeatable price/performance ratio and is
Highly recommended, especially for large-stroke machines with a stroke of 10mm or more.