T3000 V3 - Eccentric polishing machine
| Tension | 230V |
| frequency | 50Hz |
| Power consumption | 750 watts |
| lifting speed | 2500 - 5500 min -1 |
| Disc diameter | max. 125 mm |
| Spindle size | 5/16"-24 |
| Weight | 2.4kg |
| Lpa (sound pressure) | 84db(A) |
| Lwa (Sound Power) | 95db(A) |
| Cable length | 8 meters |
| WEEE reg. no. | DE 64199561 |
Characteristics
- 750 watts of power
- 10 mm eccentric mechanism
- Low vibration
- Speed constant with remote electronics
- Torque control display via green and red LED
- Can also be operated with a 75 mm support plate
The T3000 V3 eccentric polishing machine is suitable for everyone with a 10mm eccentric HUB, the standard 125mm backing plate and an output of 750 watts. Due to the constant keeping with remote electronics, the freely rotating rotation of the support plate does not stop, even in the event of slight tilting on round surfaces.
Whether you are completely new to vehicle preparation or a professional detailer, this machine is something for every user.
The T3000 particularly stands out with the modern design of the eccentric polishing machine, particularly pleasant feel, and robust and smooth-running electronics. The two LEDs light up on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb lights up, the pressure on the surface is sufficient. If the red LED bulb lights up, the pressure on the surface must be reduced.
Carbon brushes
The pre-assembled carbon brushes (1 pair) in the machine have an average lifespan of approx. 350 hours of pure use.
This corresponds to the preparation of around 50 vehicles.
This assumes that the machine is handled and used correctly during the polishing process, otherwise the service life of the carbon brushes can vary greatly.
Note: Replacement carbon brushes are always included with the machine as standard, so 2 pairs of carbon brushes are included in the delivery.
scope of delivery
- 125 mm support plate (pre-assembled)
- Storage bag
- Replacement carbon brushes
- Allen key
- operation manual